A406 Tool Settings

v60 V-Tip Engraving Bit

• Diameter 6.2 mils
• Speed 55k rpm
• Plunge Rate 20
• Feed Rate 15 (reduce to 12.5 as bit dulls)
• Penetration Depth: 5.4 mils (this can change, between 4-8 mils is reasonable)

v90 V-Tip Engraving Bit

• Diameter 8 mils
• Speed 60k rpm
• Plunge Rate 30
• Feed Rate 10 (reduce to 7.5 as bit dulls)
• Penetration Depth: 6.2 mils (this can change, between 4-8 mils is reasonable)